Screws & Components

UNI Prost AS Screws (100 unit pack)

The UNI Prost AS screw design originated from the Astra Uni Abutment screw design, which allowed for more thickness in the material which created the screw seating platform. This was especially needed for milled PMMA as well as 3D-printed resin...

UNI Prost CS Screws (100 unit pack)

The UNI Prost CS screw is 0.3mm shorter verision than the UNI Prost AS. It design for MUAs which have less internal space and provents the screw from bottoming out early. This screw can be utilized in any material.Use a Hex 1.25mm/0.50.   It is...

UNI Prost MS Screws (100 unit pack)

The UNI Prost MS screw is the standard short MUA screw. It is designed for Link Abutments and bars. Use a Unigrip driver.   It is recommended that the screws are not reused after first use. Don't hesitate to contact support if you need the...

UNI Prost RS Screws (100 unit pack)

The UNI Prost RS screw is designed for with a long morse taper. It's great because it self centers and only needs hand torque. Use a Hex 1.25mm/0.50.   It is recommended that the screws are not reused after first use. Don't hesitate to contact...

UNI Prost VS Screws (100 unit pack)

The UNI Prost VS screw is designed for with a short taper. It's great because it self centers and only needs hand torque. Use a Hex 1.25mm/0.50.   It is recommended that the screws are not reused after first use. Don't hesitate to contact...

Gen30 AS Screw

Gen30 AS Screw The angled version of our UNI Prost AS screw.Head Shape: Flat seatDriver: UBH30 4 LobesThread: M1.4exocad Library: Full Arch Pro v2.5Use: Standard size MUA screw and be use with all material and most abutments  

Gen30 MS Screw

Gen30 MS Screw Head Shape: Flat seatDriver: UBH30 4 LobesThread: M1.4exocad Library: Full Arch Pro v2.5Use: Standard size MUA screw and be use with all material and most abutmentsT-Tool: MS Ø1.65mm VarioAxis  

Gen30 RS Screw

Gen30 RS Screw Head Shape: High ConicalDriver: UBH30 4 LobesThread: M1.4exocad Library: Full Arch Pro v2.5Use: All materials typesT-Tool: RS Ø1.65mm VarioAxis  

Gen30 VS Screw

Gen30 VS Screw The 30 degree angled version of our UNI Prost VS screw.Head Shape: Short taperDriver: UBH30 4 LobesThread: M1.4exocad Library: Full Arch Pro v2.5Use: Standard size MUA screw and be use with all material and most abutmentsT-Tool: VS...

Gen30 XS Screw

GenX30 Screw Head Shape: 2.70mm diameter with a slight conical seatDriver: UBH30 4 LobesThread: M1.4exocad Library: Full Arch Pro v2.5T-Tool: XS Ø1.85mm VarioAxis

Latch Driver Points

GenX Healing Cap

GenX Healing Cap Healing Cap Features Tissue training geometry Captured screw Sand blasted and scanable Can be placed and removed with the use of a driver Designed for tradition and digital impressions 6.5mm tall Two sizes: Narrow (6.0mm) and Wide (7...

DesaiSplint Capalog Refill Packs

Analog CAP MUA 4.8 Can be used in the following ways Polishing protective cap for prosthetics Desai Splint incert

Link Copings

Link Copings can be cemented in zirconia of plastic materials. They come in three different sizes Narrow, Wide, and Tall.  

UBH30 4L Driver